You need to upgrade your Flash Player

ORMIC Baler OCT 110X110 190T

OCT 110X110 190T

Description

The ORMIC Baler OCT110X110-190T is manufactured from profiles IPE, HEB, UNP board and steel plates. As all the equipment of Ormic Spa axles and pins are made of steel C40, the grommets and the wheels are heat-treated and hardened at high frequencies. The same heat treatment is applied with particular attention to the cutting blades of the baler which are made of steel for heavy tools. Bearings and rollers are made of bronze BZ14, Nylatron, black GSM of high density. Trolley wheels and axles are equipped with grease blocks and zert fittings for easy lubrication.

The surface treatment (painting) is made by specialized technicians using a high quality paint dual consistence with epoxy base and anti-corrosive, passed with two coats of color to achieve the appropriate thickness, the same procedure is applied to the rest of the sorting plant.
Extra attention is given to the protective guards, which should retain the convenience of operator to intervene without compromising the security according the existing legislation.

General Characteristics

Total Length

11.860 mm

Width

5.800 mm (edge to edge)

Height

2.225 mm (at the hopper base)

Hopper base

1.000 x 2.000 mm

Bale Section

1.100 x  1.100 mm (dim. W x H)

Bale Length

Variable

Baler Weight

29.000 kg (less oil)

Technical Characteristics

Installed Power

55+55+55+11+4+3+0,75 KW 75+75+75+15+5,5+4+1 HP

Ram Force

190,000 kg

Ram Face Pressure

15.7kg/cm²

Oil reservoir capacity

5.000 liters

Cooling

Ventilated air/oil exchanger

Volume production per hour

532 m3/h

Loose material of density 60Kg/m3

20.000 Kg/h

Loose material of density 120Kg/m3

40.000 Kg/h

Extrusion Chamber Volume

2.42m3

Number of bindings 5

Cycle time

14-19 sec

Cycles per minute

3

Binding time

25 sec